Pss shaft seal

Sofort Ergebnisse aus Mehreren Quellen! Tausende von Menschen haben den Sale bereits genutzt! GigaGünstig vergleicht Produkte aus verschiedenen Shops. Jetzt vergleichen und sparen!

The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellow with hose clamps, and the back end of the bellow fits over the stern tube and is secured with hose clamps.

Downloads: Installation Instructions. CONDIZIONI GENERALI DI VENDITA. PYI")to the original purchaser only to be free from defects in material and workmanship under normal use and maintenance for a period of three (3) years from the date of first use or shipment, whichever comes first.

This seal will eliminate shaft wear and minimize corrosion. These type of seals are unaffected by engine motion or vibrations. The result is a 100% watertight. Follow the steps outlined in the video.

Ideal replacement for packing glands and lip seals in marine or industrial environments - Highly durable, low maintenance and cost-effective solution. Certified by ABS, BV (or Bureau Veritas), RINA, and US Coast Guard approved.

Finally, wipe down the shaft with a clean rag to remove any residue or dirt. You can now start assembling the new shaft seal.

Begin by sliding the bellows down the shaft, then clamping this to the stern tube with the two stainless-steel pipe clamps that come supplied with the shaft seal. The carbon flange is attached to a convoluted rubber (EPDM) bellow and the back of the bellow is attached to the shaft log (sterntube) of the boat with hose clamps.

They require no lubrication other than the water they are working in. Length for this seal is 5¼” to 5½” as shown on the diagram.

If you experience any spray or mist following the break in perio measure the installed length, and adjust the seal as needed for an installed length of 5¼”. I have wnodered about this, as my Meridian 4PH is the. Prezzo: 33€ - 38€ Tutti i. Traction made beautiful. Engine mounts, flexible shaft couplings, split.

Due o-ring bloccano e sigillano il rotore in acciaio inox sull’albero. Per fissare il rotore all’albero vengono utilizzati due grani per parte.

La tenuta del sistema viene garantita dal contatto tra la grafite e il rotore in. FOR FULL RANGE OF PRICES, GO TO PRICE LISTS - Price List A. It is critically important that TWO set screws be used on on top of the other to lock them into place.

The o-rings should seat in the slots well and no grease or oil should be used when sliding the rotor onto the shaft. We carry the full line of Tides Marine and PYI marine shaft seals, including inch and metric size as well as the maintenance kits. This has been ongoing now for weeks or so. The seal is a stainless steel disc attached to the propeller shaft near the transmission, and a matching set of bellows and a carbon disc that pushes up against the steel disc.

The number one selling marine mechanical seal worldwide. Recognised as the premiere retrofit (aftermarket) seal on the world market.

Stainless Steel Rotor (1) 2. Stainless Steel Set Screws 3. Reinforced Bellow (1) 8. Shaft Retension Collar Range. The shaft seal is a sealing element which seals the rotating shaft of a centrifugal pump where it passes through the non-rotating pump casing, reducing fluidleakage to atmosphere or the entry of air from outside to a certain level, and keeps wear of the sealing faces as low as possible.