Offset bushings

Hochwertige Cable Bushing Accessories für den industriellen Einsatz. RS Components überzeugt durch langjährige Erfahrung und hohe Qualitätsansprüche! Serviceleistungen hier!

Alle Produkte auf einem Blick! Easy ordering, 48hr turnaround. Produced for Fox, RockShox, X-Fusion, Cane Creek, DVO and many, many more.

All our bushings are custom made for each customer in under 48hrs. Struggling to find the right shock bushings for your bike? Every one of our bushings is custom made to order in under 48hrs, so we can produce them for almost any bike! Santa Cruz) also supported.

Complete your shopping at offsetbushings. And why am I removing one I have ins.

The idea behind offset bushings is to shorten the eye to eye distance of your shock and therefore lower the bottom bracket and slacken the head angle. Fitting two bushings to the Five, I dropped a degree off the headangle to degrees and removed a centimetre from the bottom bracket height.n Sie Cable Bushing Accessories?

The best £I ever spent on my bike! Machined to order for all bikes. Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on. One mount kit fits one end of the shock and include Rear Shock.

Why to use 3-piece mounting hardware with axle pin and two spacers instead of 2-piece reducers? How to fit a new DU bush and offset hardware to your rear shock - Duration: 6:31.

They are made to give you more angle in your control arms for more bite in your chassis. However, I have used one for something completely different. My rear shock was shot (that can happen when you buy your frame cheap on ebay !) and suspension servicing costs are really expensive where I live, so I decided to replace.

Offset or standard bushings ? Make sure to install the offset bushings in the correct orientation. If you accidentally install them rotated 1degrees you will actually add camber! The sleeve needs to be closer to the upper ball joint.

Also install the bushings so that the hole is parallel to the control arm so that you only affect camber during this install. Press your old bushings out (these usually come out very easily). Take your new, offset bushings and slot them in. I build bikes for a living and this is my favorite bike for the trails I regularly ride.

Tretlagerabsenkung resultieren. Titan ist aber recht pricy, die Kollegen wollen Pfund zzgl. Versan das ist recht viel für die Buchsen. The vast majority of riders will use offset bushings to slacken the geometry of their bike and lower the bottom bracket.

This will have the effect of increasing stability on fast and rugged descents and can make your steering much more predictable. Conversely you can use offset bushings to raise the bottom bracket and steepen the head angle.

Once the frame sags the control arm mounting points tip in which essentiall pulls the top of the tire in adding negative static camber. Installation was simple, a brass sleeve with an offset hole, spacers cut to fit, just remove the old bushings and install the offset bushings. This increases bump steer and tire wear. One if my goals was to find a compromise that allowed me to run both 29” and 27.

I needed to maintain sufficient seat post clearance on the 29” wheels while maintaining adequate BB height for pedal clearance.